A

aamcle

Member

• Sep 5, 2012

• #1

Is there a guide for wiring a 12 S socket to my old (W reg) Freelander, I was going to get a real landy part complete with the socket that clips into the wiring loom but it's nearly £140.

I can get a split charge relay and the socket for under £20 from Towsure ......

Any idea were the socket on the wiring loom is physically located?

Any help much appreciated.


Thanks aamcle

 

teddywood1

Well-Known Member

• Sep 5, 2012

• #2

they are located on drivers side "offside" in the boot behind the panel

 

A

aamcle

Member

• Sep 5, 2012

• #3

Thanks.


aamcle

 

Davidspect

New Member

• Sep 5, 2012

• #4

If your going to wire it yourself both male and female parts of the socket are attached to the loom. One looks like a blank but is infact the socket you just need the contacts.

 

T

td4van

Well-Known Member

• Sep 5, 2012

• #5

Factory system picks up power for the 12s from the engine bay - look at fitting instructions on TOPIx for more idea.

 

A

aamcle

Member

• Sep 5, 2012

• #6

Thanks I got the topix doc, my main worry is that I'll upset some thing in the fancy electronics and that it will either complain ( warning lights) or die.

should it be Ok at least in theory?


Thanks aamcle

 

R

Richard Martin

Well-Known Member

• Sep 5, 2012

• #7

teddywood1 said:

they are located on drivers side "offside" in the boot behind the panel

Click to expand...

that's the 12n isn't it?

 

Davidspect

New Member

• Sep 5, 2012

• #8

that's the 12n isn't it?

Click to expand...

Same mistake in my post, sorry.

 

T

td4van

Well-Known Member

• Sep 6, 2012

• #9

Hi as long as you take feeds from same place as factory install then you will be fine