discomark10
Well-Known Member
Ill check a tyre valve in a bit just to see what the inside diamiter is on it
DaveM-sport
Active Member
They'll fit in. lots of people throw them in that way
Tuskenraider
New Member
Mine have just turned up 
Bwahahahahahaha thats rediculous
Bwahahahahahaha thats rediculous
DaveM-sport
Active Member
They are actually suppose to be a very good tyre. Good load bearing too apparently.
Mr Noisy
Coming in your ears.
There is a lad with 9x16 on a series on here isn't there?!
Also regards balls, obviously the balls need to be heavy enough that you don't need **** loads of them
I found that 10oz pretty much filled a standard 500ml aerosol spray paint can cap, like half a standard mug say, to give you an idea of amount
Tried to put them in through the valve, #### me what a joke that was they just kept jamming in the valve stem so buggered that off and popped the beads
I've never counted mine so can't tell you how many I've got
Also regards balls, obviously the balls need to be heavy enough that you don't need **** loads of them
I found that 10oz pretty much filled a standard 500ml aerosol spray paint can cap, like half a standard mug say, to give you an idea of amount
Tried to put them in through the valve, #### me what a joke that was they just kept jamming in the valve stem so buggered that off and popped the beads
I've never counted mine so can't tell you how many I've got
Tuskenraider
New Member
I dont know, must be perspective.
Anyway they are on.
Anyway they are on.
DaveM-sport
Active Member
I want to put new tyres on mine now just for the sake of it
Got a rip on the sidewall of one of them a few weeks ago so will have to do something soon as I've no spare... And of course, your not winning if you just get the one on its own for a spare
Got a rip on the sidewall of one of them a few weeks ago so will have to do something soon as I've no spare... And of course, your not winning if you just get the one on its own for a spare
discomark10
Well-Known Member
good point sam, just pop the bead off and poor em in. could even get slightly larger bb's then
Co-Pang-Yang
Well-Known Member
There is a lad with 9x16 on a series on here isn't there?!
Also regards balls, obviously the balls need to be heavy enough that you don't need **** loads of them
I found that 10oz pretty much filled a standard 500ml aerosol spray paint can cap, like half a standard mug say, to give you an idea of amount
Tried to put them in through the valve, #### me what a joke that was they just kept jamming in the valve stem so buggered that off and popped the beads
I've never counted mine so can't tell you how many I've got
Wanna order some off eBay just don't wanna end up with **** loads that are no good cause they are too light
Tuskenraider
New Member
So the price (around £11-14) on the dynabeads site is enough for 1 wheel? Looking at the price of ball bearings it looks cheaper to get them from there.
Tuskenraider
New Member
32oz, applicator and valve core removal tool comes to £69 delivered. Everywhere i have looked at for ball bearings is nearer to £100.
