Whats the name (and ideally p/n) of the metal bits and screws that hold a Discovery's window switch fascia's backplate in place?
Its a small bent 'clip' of metal (one side 'threaded' - the other with a hole) that clips onto the central console.
The screw then goes through the switch back plate and screws into the threaded clip - securing the backplate to the console.
I've tried the obvious software to no avail :-(
I only have 2 left - and its meant to have 4 - I suspect I'll only have 1 the after the next time I take the console to pieces (!!)
Its a small bent 'clip' of metal (one side 'threaded' - the other with a hole) that clips onto the central console.
The screw then goes through the switch back plate and screws into the threaded clip - securing the backplate to the console.
I've tried the obvious software to no avail :-(
I only have 2 left - and its meant to have 4 - I suspect I'll only have 1 the after the next time I take the console to pieces (!!)
...... what about the pin that holds the metal door thing that sits between the two door hinges. I'm talking about the pin that sits on the body side, not what connects the metal thing to the door.
