Badger
Well-Known Member
After i fitted the xfer box some time ago, i realised i couldn't select low range on the box, push the lever and it never engaged.
Today i had a look at the reason why and it comes down to the link pin fouling the gearbox.
If you put the link pin through the linkage from drivers side towards the gearbox, it fouls the gearbox when trying to select low range ( neutral & hugh range are fine )
However there is not enough room that i can see with my large hands to get the pin to go through the other way which'll allow it to clear the gearbox.
Any ideas??
Today i had a look at the reason why and it comes down to the link pin fouling the gearbox.
If you put the link pin through the linkage from drivers side towards the gearbox, it fouls the gearbox when trying to select low range ( neutral & hugh range are fine )
However there is not enough room that i can see with my large hands to get the pin to go through the other way which'll allow it to clear the gearbox.
Any ideas??