E

Earlofdon76

Member
Folks, the information screen on my TD6 has been changed for some aftermarket thing by a previous owner.
As such I cannot access the FBH settings.
Is it possible purchase a remote control kit in order to use the FBH?
 
Firstly I'd check if you have the remote start module fitted or find the plug. If it is you can pull the plug and short the white/green and orange/yellow to try and start the FBH. You will also need to remove the temp sensor from behind the front grill and stick it in ice cold water as the FBH only works at below 6 degrees.





1724843828447.png
 
You need to try what I suggested above before you start wasting money on remotes for something that may not work. Once you know it works then we can help with the remote. On my 2005 with the car parked and locked up on the drive it's the FBH that wakes up the cars HVAC so it may not work with an aftermarket head unit. It may also stop working once you start the car and that tries to take control.
 
  • Like
Reactions: kds
backinblack said:
You need to try what I suggested above before you start wasting money on remotes for something that may not work. Once you know it works then we can help with the remote. On my 2005 with the car parked and locked up on the drive it's the FBH that wakes up the cars HVAC so it may not work with an aftermarket head unit. It may also stop working once you start the car and that tries to take control.
Click to expand...
Yes, tried what you said and it all works fine.
 
You must log in or register to reply here.

Similar threads

M
Air suspension problems
Replies
1
Views
203
Datatek
Datatek
M
Air suspension problems
2 3
Replies
59
Views
2K
Rubberknees
Rubberknees
Blob
L322 FBH circuit board test/repair any recommendations?
2
Replies
33
Views
3K
Datatek
Datatek
A
Need someone with a nanocom
Replies
5
Views
491
marjon
marjon
Freelandertd42004
Fitting remote control unit for fbh landrover td4
Replies
0
Views
764
Freelandertd42004
Freelandertd42004