geordielad Active Member Aug 28, 2013 #1 is it possible to read the fault code without plugging into a code reader i could with my old vectra thanks in advance
is it possible to read the fault code without plugging into a code reader i could with my old vectra thanks in advance
Jonnyb1990 Well-Known Member Aug 28, 2013 #2 As far as I know you can only read codes with a code reader
drewster Well-Known Member Aug 28, 2013 #3 I think there is a way to use the air con display on a td5 disco but don't quote me on that
S snapper Active Member Aug 28, 2013 #4 geordielad said: is it possible to read the fault code without plugging into a code reader i could with my old vectra thanks in advance Click to expand... no, you need to plug it in. depending on the age/model, you can read the emissions faults from the engine with a generic OBD2 reader, but to read the proper LR codes, you need a system like hawkeye / rovacom / nanocom / autologic / t4 etc
geordielad said: is it possible to read the fault code without plugging into a code reader i could with my old vectra thanks in advance Click to expand... no, you need to plug it in. depending on the age/model, you can read the emissions faults from the engine with a generic OBD2 reader, but to read the proper LR codes, you need a system like hawkeye / rovacom / nanocom / autologic / t4 etc