Daniie

Member
Hi all,

Hope you are all keeping well.

Sorry to bother you all again. Another problem with my range....
I need some help with fault code U3000-50 Control Module - System Programming Failure. What does it mean? How do I solve the problem?

Thanks in advance
 
Hi

if u clear the code does it come back, is there any date / mileage plse, does every thing work ok

normally U codes can be ignored and cleared

hope that helps
 
Snap on diagnostics, just the one code came up

if it was the only 1 your lucky:)
Ignore most ā€œUā€ codes, but could be a sign of damp creeping in. If you want to have a look under carpets and in the boot cubbies.

I take it the car is otherwise fine?

J
 
Hi

if u clear the code does it come back, is there any date / mileage plse, does every thing work ok

normally U codes can be ignored and cleared

hope that helps

The code was cleared. Then when the car was started it came back up. Everything seems to work ok.
 
if it was the only 1 your lucky:)
Ignore most ā€œUā€ codes, but could be a sign of damp creeping in. If you want to have a look under carpets and in the boot cubbies.

I take it the car is otherwise fine?

J

Thank you, I will have a check.
 
Low voltage or comms errors due to low voltage or starvation due to a long start/none start... Flipping computers:p
 

Similar threads