Jamiegreen

Well-Known Member
Just changed all my calipers/pads/discs and flexi pipes. But has always had that fault on Hawkeye which always comes back eventually. I have changed the relay to rule out that sticking. Is it time for me to swap the ABS modular? I have enough of the things. As far as I know if its the pump its not fixable?
Cheers

Also to mention, it has already had the ground and.. other wire fix.. that causes them problems to the ABS, I can see the 2 new wires coming out of it. But its probably been done sh*t like the rest of the work the previous owner did.
 
It literally took me over an hour to find the 3rd ABS washer thing.. and the one I found wasn't even the one from this car o_Oo_Oo_O

@sierrafery
When doing a modular bleed on hawkeye, do I need to crack open any of the lines since its probably empty?
 
Worked out all good. Its been driven for an hour after, with various hard braking attemps. ABS is working great, and Terrifirma ceramic pads with Bearmach brake discs are working amazing, stops quicker than my 900kg car did! No faults came back.
Cheers @sierrafery
 

Similar threads