M

motlymo

New Member

• Sep 6, 2011

• #1

Hi
I can probably work out which wires do what to splice the new plugs to the old wiring except for the main beam and dipped as the old haedlight unit has the combined bulb whilst the new has 2 sepaerate bulbs. Can some kind person please explain which colours wires to splice together or at least how to splice the main and dipped beams?
regards

 

chromiumuk

Well-Known Member

• Sep 7, 2011

• #2

Muply is your man for this.

 

bigshoza

New Member

• Sep 8, 2011

• #3

I wanna do this so was reading into it quite allot apparently all you need is a BMW mini headlight conversion kit again apparently £15 or so,

 

2.0_hippo

Well-Known Member

• Sep 8, 2011

• #4

easy peasy !

Cut off old lamp holder, then just combine the two negatives on the facelift lights to the existing single negative cable on the cars loom then just work out which of the remaining two cores left are high and low beam, then just connect to the new facelift lights
simples

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

• Sep 8, 2011

• #5

yu will need a relay as th edipped beam must be used in conjunction when the high beam comes on.

 

2.0_hippo

Well-Known Member

• Sep 8, 2011

• #6

The Mad Hat Man said:

yu will need a relay as th edipped beam must be used in conjunction when the high beam comes on.

Click to expand...

good point