N

Newinnwoodman

Active Member

• Jun 17, 2019

• #1

My EAS height position sensors were working fine but I thought I’d give them a wriggle . Found they were looser than Iiked.
Thought I’d take a couple of piccies to keep you guys amused

 

Attachments

• 
  32E1CF44-1ECC-46BE-95DF-E5D482220E29.jpeg

  264.2 KB · Views: 139
• 
  B4500E92-3408-4A4A-B629-6EB8AC8F6BAB.jpeg

  216.2 KB · Views: 119

RangeRoller dt

Well-Sprung Member

• Jun 17, 2019

• #2

Newinnwoodman said:

My EAS height position sensors were working fine but I thought

Click to expand...

^^^ this was your mistake

I am amused

 

RangeRoller dt

Well-Sprung Member

• Jun 17, 2019

• #3

They are not cheap

Is glue em for now

 

N

Newinnwoodman

Active Member

• Jun 17, 2019

• #4

That’s the problem … I thought

 

N

Newinnwoodman

Active Member

• Jun 17, 2019

• #5

I reckon those end bits will be 27 1/2p each

 

backinblack

Well-Known Member

Full Member

• Jun 17, 2019

• #6

I had that on my disco so I 3D printed a couple of ends

 

N

Newinnwoodman

Active Member

• Jun 17, 2019

• #7

backinblack said:

I had that on my disco so I 3D printed a couple of ends

View attachment 181674

Click to expand...

That’s brill

 

aj1954

Well-Known Member

Full Member

• Jun 17, 2019

• #8

A classic case of, if it aint broke, dont fix it

 

N

Newinnwoodman

Active Member

• Jun 17, 2019

• #9

backinblack said:

I had that on my disco so I 3D printed a couple of ends

View attachment 181674

Click to expand...

Been thinking again lol… any chance I could procure a small number of these from you pls?

 

wammers

No longer with us, RIP

Donater

• Jun 18, 2019

• #10

I may as well do this whilst i am here is the downfall of many amateur mechanics. And sadly some professional ones a also. If it works and needs nothing more than a bit of lubrication, leave it alone.

 

backinblack

Well-Known Member

Full Member

• Jun 18, 2019

• #11

Newinnwoodman said:

Been thinking again lol… any chance I could procure a small number of these from you pls?

Click to expand...

@Newinnwoodman I can print some off but I don't know if the Disco 2 is the same as the RR.

 

N

Newinnwoodman

Active Member

• Jun 18, 2019

• #12

backinblack said:

@Newinnwoodman I can print some off but I don't know if the Disco 2 is the same as the RR.

Click to expand...

That would be fantastic. Thx. I’ll take one off Tomoz and send you a piccy of the dimensions.

 

backinblack

Well-Known Member

Full Member

• Jun 18, 2019

• #13

No problem

 

backinblack

Well-Known Member

Full Member

• Jun 18, 2019

• #13

No problem

 

backinblack

Well-Known Member

Full Member

• Jun 18, 2019

• #14

Trying to post some pics with dimensions but it ain't working, will try again tomorrow.

 

backinblack

Well-Known Member

Full Member

• Jun 18, 2019

• #15

Ah crap, I give up for tonight

 

N

Newinnwoodman

Active Member

• Jun 19, 2019

• #16

That is brilliant. Did you design it yourself?

 

backinblack

Well-Known Member

Full Member

• Jun 19, 2019

• #17

Yes, Here's the other pic I couldn't do last night. Mind you they don't look that good printed
I didn't keep the Disco very long after I fitted it so not sure how long it will last, and as it is hard plastic it won't soak up the bumps.
There is a 10mm collar on the (Disco 2) chassis mount that needs to be inserted in the hole which you may have open up a little with a 10mm drill bit.

 

N

Newinnwoodman

Active Member

• Jun 19, 2019

• #18

I’ve done a bit of measuring and I do believe they will do the job mighty fine. I’ll pm my address and you can let me know what I owe you.
Thanks again
Rich