Lawfs

Member
Hi, I recently asked for any help or advice regarding middle row seats for a TD5 110.
I ended up taking the very expensive plunge and purchasing the Exmoor trim premium middle row seats.
They originally said they’d take around 8-10 weeks to come but was delivered within a week.
They also said they’d take roughly an hour or two fit and was a easy job. I wish this was the case, they was a right pain in the arse. A lot of the bolts wasn’t long enough and they didn’t supply enough plate washers either.
They look nice fitted though, and seem reasonably comfy, although my head does touch the roof now. I’ve attached some photos in case any one was interested.
cheers
 

Attachments

  • A8408EDA-3186-4603-9D76-43590CD2412B.jpeg
    A8408EDA-3186-4603-9D76-43590CD2412B.jpeg
    266.7 KB · Views: 164
  • 03F87AC9-4E8A-4651-9736-626C258DAECF.jpeg
    03F87AC9-4E8A-4651-9736-626C258DAECF.jpeg
    326.7 KB · Views: 240
  • C39E59D3-C492-40CD-A0E4-46B6ABA04510.jpeg
    C39E59D3-C492-40CD-A0E4-46B6ABA04510.jpeg
    354.4 KB · Views: 143
Well done! They look nice, what was in there before? Shame about the headroom but at least you will be in the driver's seat!! :p
 
I had the 60/40 bench seat before, so the premium seats are the only ones with the universal seat frames to fit, so exmoor so kindly charge a mere £1600 for them :eek::mad:
 
Hi, I recently asked for any help or advice regarding middle row seats for a TD5 110.
I ended up taking the very expensive plunge and purchasing the Exmoor trim premium middle row seats.
They originally said they’d take around 8-10 weeks to come but was delivered within a week.
They also said they’d take roughly an hour or two fit and was a easy job. I wish this was the case, they was a right pain in the arse. A lot of the bolts wasn’t long enough and they didn’t supply enough plate washers either.
They look nice fitted though, and seem reasonably comfy, although my head does touch the roof now. I’ve attached some photos in case any one was interested.
cheers
These look great. I just bought the same and am struggling with spacing. As there are no instructions, I am not sure where to place the left and right with good spacing away from the door, and leaving equidistant spacing between them all. I don’t see using the existing holes for the 60/40 seats as they aren’t in quite the right places. I appreciate I need to drill some holes- but just wondering what your spacing was vs the old bench bolts/placement? Center I assume was all new holes, as there are no holes for mine in the middle since I have a bench attached on the left and right only.
 

Similar threads