nortm005 · Feb 13, 2021

Hi,
I've trawled the web and forums but can't seem to find photos of the correct layout for the exhaust on a 2.5 NA (1986).
I am confident i have fitted the down pipe and the middle box correctly, but having real difficulty with the last 2 sections.
Any photos would help massively.
Thanks

marjon · Feb 13, 2021

Photos of what you have and how far you got would help others too

The reason i say is exhaust dont usually have problem fitting together and go where they should.

J

Hicap phill · Feb 13, 2021

Fit down pipe & end box. Both should be known fixed points
Then you should be able to figure the middle out.
(That’s aslong as you have the correct exhaust)

nortm005 · Feb 13, 2021

This is what i have at the moment.

Flossie · Feb 13, 2021

I've only had LWB but that looks totally wrong even for a 90.

Hicap phill · Feb 13, 2021

End box wrong. Should exit below the chassis
That looks like a an early range center box.

lynall · Feb 13, 2021

See if these diagrams help, though they are for the 110 model, they do look like what you already have?

nortm005 · Feb 13, 2021

Yep those are the diagrams I have. It's just the getting the right orientation of the rear silencer and tail pipe i'm struggling with. They are the parts that came off the car before the rebuild started so I know they are correct! Its the brackets/orientations really

Landyfox · Feb 13, 2021

You have it too high. If I can remember correctly, it shouldn’t be fed through the tub support bracket.

nortm005

Member

marjon

Well-Known Member

Hicap phill

Well-Known Member

nortm005

Member

Attachments

Flossie

Well-Known Member

Hicap phill

Well-Known Member

lynall

Well-Known Member

nortm005

Member

Landyfox

Well-Known Member

Similar threads