Beneagles

Well-Known Member
Full Member
Had a rough-ride issue recently - and garage replaced the Watts linkage. Now find that when cornering at low speed there is excessive roll once straightened out. Nothing obvious when driving normally...only after turning corners and such. Tyre pressures all 32psi +/- 2. No feeling of anything transferring through the steering column..more like the body pitching from side to side. Any ideas? Cheers
 
Had a rough-ride issue recently - and garage replaced the Watts linkage. Now find that when cornering at low speed there is excessive roll once straightened out. Nothing obvious when driving normally...only after turning corners and such. Tyre pressures all 32psi +/- 2. No feeling of anything transferring through the steering column..more like the body pitching from side to side. Any ideas? Cheers


1. I'd be putting 36-38psi in those back tyres;

2. Does the car still have ACE ?

Dave
 
1. I'd be putting 36-38psi in those back tyres;

2. Does the car still have ACE ?

Dave

Currently no load in the back of the Disco... but will try a higher pressure.
ACE is long gone.

Would have thought ARB bushes would effect driving at all speeds, rather than just low??
 
From the Disco owner's manual, for what it's worth.
Under no load conditions:
Front 30 psi
Rear 38 psi
 
David has a good point there, if the ACE has been removed/disabled and the ACE arb's were not replaced with the thicker non-ACE arb's, that will induce roll.

Dave
 

Similar threads