Possibly. Are you selling the mats?
Possibly. Are you selling the mats?
Drizz
Well-Known Member
Yep!
Well, hopefully I'll win them and the bumper corners and get to see the custom disco when I pick them up
****! Just got outbid on the mats with 2 seconds left, so didn't have time to bid again! I won't be beaten to the boot liner, though!
Bugger! Beat again
Bugger! Beat again
Last edited:
Drizz
Well-Known Member
****! Just got outbid on the mats with 2 seconds left, so didn't have time to bid again! I won't be beaten to the boot liner, though!
Bugger! Beat again
Well the bloke who won is threatening to leave me negative feedback as im not around saturday to collect it as he demands so you could make me an offer......
Tell me what you want for them and I'll have the boot and rear mats.
I'll give you more than the other bloke won them for . I've PM'd you.
. I've PM'd you.
Last edited:
Co-Pang-Yang
Well-Known Member
Anyone local with a working 300tdi drive tensioner?
Think mines giving up and won't be able to get one ordered in tomorrow.
Think mines giving up and won't be able to get one ordered in tomorrow.
666 george
Well-Known Member
Can't you just put new bearings in it?
Drizz
Well-Known Member
I'll give you more than the other bloke won them for
Ill sort it out today Steve. Been very busy. Ill let you now....
Co-Pang-Yang
Well-Known Member
Still in Manchester Brian, am going to RST tomorrow but they sell them for £50! Can get online but will be a while till I can fit it.
Never tried changing the bearings before.
Never tried changing the bearings before.
666 george
Well-Known Member
It's got no pic's but it's an easy job. http://www.landyzone.co.uk/lz/f38/300tdi-changing-serpantine-tensioner-bearing-64147.html
666 george
Well-Known Member
Or 300TDi belt tensioner. - Land Rover Technical Archive - LR4x4 - The Land Rover Forum with a couple of pic's
OK mate, cheers.
sible88
New Member
If your going billing I can pick one up from Britpart and bring it with me
Co-Pang-Yang
Well-Known Member
Only issue is I think the tensioner might have lost its 'spring'
When I removed the belt I noticed it was very notchy.
When I removed the belt I noticed it was very notchy.
matthew2riches
New Member
Ah, shame
I changed the bearing on its own and it took 7 minutes including finding the small electrical screwdriver to remove the circlip.
Simply pop the clip out press the bearing out then press new one in with lots of white grease shoved into the thing whilst you're there.
I changed the bearing on its own and it took 7 minutes including finding the small electrical screwdriver to remove the circlip.
Simply pop the clip out press the bearing out then press new one in with lots of white grease shoved into the thing whilst you're there.
