matthew2riches
New Member
I reckon I could fit 2 of them in the back as mine is only a 2 seater.
I reckon I could fit 2 of them in the back as mine is only a 2 seater.
Jongould
New Member
2 week spool up time, massive power then bang.... would be a fun 0.5 seconds tho!
mikeyt
Active Member
Trouble is with a smallish Turbo you will start to work outside it's efficiency zone higher in the revs and it will increase intake temps further and therefore loose power.
That's the beauty of a vnt turbo best of both worlds.
Jon if you want a t28 I have quite a few kicking around if you want one to mock up with but they all have nackered bearings but I think a t28 will be too big
Jongould
New Member
Oh that would be blinding. I like the idea of a T28 as its watercooled as well so will help in keeping charge temps down as well, not sure if the T25 is still watercooled?
wickford90
Well-Known Member
hello?
wickford90
Well-Known Member
Mikey, that bolt arrived today it,s a 24mm do you have a 3/4drive 24mm socket if not i will get one. rest of bits turned up today aswell, none of them as cool as the bits you just had delivered.
Jongould
New Member
what engine is it? 200/300? I think I have got a set of 300 pushrods here...
Alos what has caused it? Timing slipped? What are the brass followers like?
wickford90
Well-Known Member
Not too bad .
Brian S
Well-Known Member
I've got a spare set but they are so cheap it's worth fitting new ones.
Co-Pang-Yang
Well-Known Member
I too have a new box of new things:
Not very exciting things, but new things none the less.......
Not very exciting things, but new things none the less.......
Colchester seb
New Member
Essex off road Sunday meeting at boreham mcds 9.30 if anyone's game?????
mikeyt
Active Member
Hi Geoff im still working on the torque wrench, its not his it the company he works for, and hes not giving me a straight answer on if i can borrow it. i dont wanna get him in trouble.
how does the damper look?
Thats pretty much the standard result from a cambelt failure.......guides and valves should be ok im my experience due to the valves being square to the pistons so the force is directed straight up the valve stem and onto the weaker bits......pushrods and on a 300tdi the rockers.
I too have a new box of new things:
Not very exciting things, but new things none the less.......
that will keep ya busy for a little while when you attacking it?
Jongould
New Member
If you need I have got a torque wrench, a small one and a big one...
Co-Pang-Yang
Well-Known Member
Should be done at work by 8am at the lastest in the morning (Saturday) plan on heading home grabbing a shower and going straight to the barn. Got a couple of patches to weld as well then gonna trailer it to Ash's after and he's gonna MOT and tax it for me next week.
Actually come to think of it Brian/Dan who has my trailer and can they please bring it back tomorrow?
