raisingveg

raisingveg

Well-Known Member
H reg 90 300tdi conversion , wife was driving home and said smoke was coming out of the exhaust and it was losing power so she pulled over. when I got there I changed fuel filter and checked what I could in the dark etc I then noticed the middle bolt on the rocker cover was at an angle so climbed on and it had sheared , wife then turned engine over it sounded like brexit and dark grey smoke poured out of the exhaust and with bolt removed a nice spray of oil onto the inside of the bonnet, its out side a garage in the morning I will go and let em know it needs fixing. can any of you shed some light on what it might be ?many thanks
 
It wont be cheap, but it wont be scary either.
Dont forget on the 300 depending on engine number theres different cam belt mod kits available as back in the day they had issues with the belt running off the front of the crank pulley and wearing out on the inside of the front cover then snapping when it got to thin.
Simplest/cehapest was a crank pulley with little side walls to keep the belt on, more expensive was a whole new timing chest to keep the inj pumppulley in line with the crank cambelt pulley.
 
the lad who is doing the work on it and has a landy himself and has our other cars in the garage for MOT etc he a good lad my truck is a national monument in my opinion and needs to be kept for the nation and I will pay what it takes cos I know the price will be fair will let you all know the out come and thanks for the replies
lynall said:
It wont be cheap, but it wont be scary either.
Dont forget on the 300 depending on engine number theres different cam belt mod kits available as back in the day they had issues with the belt running off the front of the crank pulley and wearing out on the inside of the front cover then snapping when it got to thin.
Simplest/cehapest was a crank pulley with little side walls to keep the belt on, more expensive was a whole new timing chest to keep the inj pumppulley in line with the crank cambelt pulley.
Click to expand...
 
I recently had the same happen to my 200tdi, (see thread here) but I had valve sealing issues so had to remove the head to regrind the valve seals. I know you are not doing the job yourself but is something else to bear in mind when it comes to the work involved.
 
dag019 said:
I recently had the same happen to my 200tdi, (see thread here) but I had valve sealing issues so had to remove the head to regrind the valve seals. I know you are not doing the job yourself but is something else to bear in mind when it comes to the work involved.
Click to expand...

Cheers the belt snapped as my wife pulled away so hopefully its not to bad
 
raisingveg said:
Cheers the belt snapped as my wife pulled away so hopefully its not to bad
Click to expand...
Its probably one of those things if you dont do it yourself then you need to know your mechanic well, would be easy to build up the parts and labour if they were trying to maximize the job.
 
You must log in or register to reply here.

Similar threads

S
Black and White Smoke 1988 90
Replies
6
Views
262
tottot
tottot
C
Intermittent white smoke and diesel in oil engine
Replies
2
Views
454
miktdish
miktdish
T
td5 engine power loss
Replies
3
Views
257
transpalette84
T
T
Tillys smokey TD5, can we fix it ?
Replies
9
Views
762
tilly2
T
200tdi Land Rover 90
Defender TD5 2003 idle problems!
Replies
5
Views
1K
Anaconda
A