G

Grimreaper

New Member

• Aug 6, 2010

• #1

When I release the accelerator while driving, the engine keeps going for about a second, maybe 2 seconds. The same thing when pressing the clutch and releasing the accelerator. Sometimes when taking of in 1st gear and shifting at very low RPM it doesn't do it. But apart from that the landy does it every time. When stationary and reving the engine, he doesn't do it. Only while driving.
Does anyone know what could cause this? Or is it normal?

Regards

 

G

Grimreaper

New Member

• Aug 9, 2010

• #2

Nobody? I'd like to get it sorted out because it's a bit annoying I think.

 

ratty

I'm not special I'm limited edition

• Aug 9, 2010

• #3

I'd be checking the clutch switch first and the throttle potentiometer second. It could do with a diagnostic check to try and confirm what's causing it.

 

G

Grimreaper

New Member

• Aug 9, 2010

• #4

The clutch switch is just an on/off switch so i'll do that first, but how do you check the throttle potentiometer?

 

ratty

I'm not special I'm limited edition

• Aug 10, 2010

• #5

Grimreaper said:

The clutch switch is just an on/off switch so i'll do that first, but how do you check the throttle potentiometer?

Click to expand...

with a diagnostic puter

 

Badger

Well-Known Member

• Aug 10, 2010

• #6

Tried WD40 on the mechanical parts of your throttle?

sometimes it's the simplest of things...

 

G

Grimreaper

New Member

• Aug 12, 2010

• #7

It can't be the clutch switch, as the truck still does it when just releasing the accelerator. He only does it when releasing the accelerator when driving, not when I'm stationary, or when i press the clutch and rev it. Only when releasing the pedal, when i was driving.

Niels