piston-return-spring
New Member
hi there
I currently have the problem that the engine is making popping noises and throws back some smoke through the carb (zenith) :/
It makes this when the choke isn't engaged.
Carb isn't adjusted, could that cause this??
I have read that this could relate to an air leak between manifolds and block but i am sure this is not case for the inlet manifold as i have put new gaskets in ...
however the exhaust manifold hasn't got any gasket (manifold is new)
ANother thing , is my timing set up properly ??
Is 6°btdc (static) right when using 95 octane fuel??? or should i advance it more ???
Or even a weak condenser or coil?? engine has 25 000 km on the clock..
Valve clearance is set up properly ; new head gasket ; engine pressure is fine (after manual) and oilbath air filter clean and refilled..
i hope not bothering you to much with my stupid problems :/
Thank you anyway for your help so far
I currently have the problem that the engine is making popping noises and throws back some smoke through the carb (zenith) :/
It makes this when the choke isn't engaged.
Carb isn't adjusted, could that cause this??
I have read that this could relate to an air leak between manifolds and block but i am sure this is not case for the inlet manifold as i have put new gaskets in ...
however the exhaust manifold hasn't got any gasket (manifold is new)
ANother thing , is my timing set up properly ??
Is 6°btdc (static) right when using 95 octane fuel??? or should i advance it more ???
Or even a weak condenser or coil?? engine has 25 000 km on the clock..
Valve clearance is set up properly ; new head gasket ; engine pressure is fine (after manual) and oilbath air filter clean and refilled..
i hope not bothering you to much with my stupid problems :/
Thank you anyway for your help so far