mick 1986
Well-Known Member
No problem. I will hopefully have mine working next week. It’s one of the last jobs before the floors can go down and the internal rebuild work can start!
No problem. I will hopefully have mine working next week. It’s one of the last jobs before the floors can go down and the internal rebuild work can start!
mick 1986
Well-Known Member
Once I get that plug in, my missus will stop moaning because the rear tub will be out of her way lol... I have just started to build a wiring loom, can’t be that hard.... can it
It isn’t that hard if you take your time and do it methodically. I didn’t build my current loom, but it is far from a standard 110 200tdi loom. It’s easy enough to do, just make sure you know what each wire is doing, or meant to be doing.
t0m1980
Active Member
That’s the plan, I’m starting with the engine first so in theory I can turn the ignition and it starts, then work on all the additional bits, warning lights etc then finish with the actual lights.... I’m thinking the indicators and hazards will be the worst to work out if I’m being honest.
mick 1986
Well-Known Member
Best to block them holes up on the spare weather seals. I didn’t have mine fitted in the photo as the tank still needs refitting, but I have bigger issues at the minute.
