84ninety

84ninety

Active Member
Can anyone tell me what these connectors are called exactly so I can order some? Can anyone recommend a place to buy too? I'm going to fit
Screenshot 2020-06-27 at 12.28.20.png
a clock! What luxury!!! :) (for a 84 Ninety)
Thank you, Paul
 
Bullet connectors. Ebay is as good a place as any. I have a box of about a thousand mixed spade, bullet, ring. Cost me about 15 quid iirc.
 
Could be wrong...but I think LR bullets won't fit those cheapy crimp ones, seem to remember an issue with the male or female ones.
I've purchased the LR females easy enough but never tried getting the males cos I've never needed them.
 
Flossie said:
Could be wrong...but I think LR bullets won't fit those cheapy crimp ones, seem to remember an issue with the male or female ones.
I've purchased the LR females easy enough but never tried getting the males cos I've never needed them.
Click to expand...
LR using non-bog standard parts for a cheap connector? I'm shocked!
 
Flossie said:
Could be wrong...but I think LR bullets won't fit those cheapy crimp ones, seem to remember an issue with the male or female ones.
I've purchased the LR females easy enough but never tried getting the males cos I've never needed them.
Click to expand...

Bought an indicator stalk and the bullets didnt fit cant remember which either...think it was the males into the loom connecter...
 
Thanks everyone! Typical!! I order just a couple of the cheap ones!! They were only a couple of quid. I’ll check out the link above for the proper ones too!
Thanks everyone really appreciate you help
Paul
 
84ninety said:
Thanks everyone! Typical!! I order just a couple of the cheap ones!! They were only a couple of quid. I’ll check out the link above for the proper ones too!
Thanks everyone really appreciate you help
Paul
Click to expand...
Halfords sell the cheap ones in packs of half a dozen or so. You'll find them around the audio area usually. They come in red, blue and yellow. The bullets are the same size. The colour designates the size of wire they take. Red small, blue bigger and yellow bigger still.
It's something like 1.5mm, 2.5mm and 4mm wire.
 
Hello everyone! Thanks for all the tips! Just to update you!
My cheap bullets did not fit, but no problem as dirt cheap and needed the spades etc anyway.
Got the proper connectors and wire from the distributor above. Not very expensive either and made in the UK which makes a change from china!!!!
Now I have the bits i'll soon have the clock in!
 
Tenebreaux said:
Handy for listening to TMS!
Click to expand...
That's one of my future jobs! Someones cut the aerial wire! Also its in a crap place.......when you put the handbrake on you cut the top of your thumb!!! :-/
Can't be a land rover genuine part can it????!!!!!!
 
The LR ones fit above where your clock is, I used to have one but fitted a mudstuff thing later on.
The LR ones used to be hard to get but I'm going back 13 yrs or so, might be easy to get now.
 
Quick Google shows the type, it's upside down in the pic, fits on the sloopy part of your grey vent panel and the front lip goes under the top horizontal soft dash.
Jeez! Only paid under a tenner for mine.
Screenshot_20200709-193336.png
 
Flossie said:
Quick Google shows the type, it's upside down in the pic, fits on the sloopy part of your grey vent panel and the front lip goes under the top horizontal soft dash.
Jeez! Only paid under a tenner for mine.View attachment 214349
Click to expand...
Thank you!
I'll have to watch out for a secondhand one!!!! :)
Can you remember if it was easy to put in?
 
You must log in or register to reply here.

Similar threads

D
Instrument cluster...
Replies
2
Views
400
lynall
L
Philgt50
Rear brakes TD4
2
Replies
26
Views
971
Philgt50
Philgt50
L
Rear Step Bolts?
Replies
5
Views
329
Lucy46
L
Parv
D4 Fuel tank cradle?
Replies
10
Views
1K
lynall
L
J
Temperature Gauge Installation South Wales
Replies
4
Views
1K
steve2286w
steve2286w