P

phobos4

New Member

• Sep 8, 2006

• #1

Hiya

wonder if you can help, 02 facelift TD5 Disco, drivers elec window goes own but does not stop. It seems to clunk..

What causes it stop normally, is it a microswitch or something else.

Any help greatly appreciated

 

thebiggreenthing

New Member

• Sep 8, 2006

• #2

would appear that your switch is sticking when operated
will it go up ??
danny

 

P

phobos4

New Member

• Sep 8, 2006

• #3

It goes up and down fine, it just doesnt stop when it gets to the bottom, I have temporarily stuck some wood in the base of the door so it cant go down any further, what I really need to know is what stops the window going down beyond its lowest position in normal operation.

 

thebiggreenthing

New Member

• Sep 8, 2006

• #4

most are timed on a relay, but some have a cut off switch so when it gets to a certain point it cuts the motor
take the doorcard off and have a look
o peel the plastic cover off aswel
danny

 

P

phobos4

New Member

• Sep 8, 2006

• #5

Hi again, thanks, the moulding and plastic have been off many times....

Ill have another look

 

thebiggreenthing

New Member

• Sep 8, 2006

• #6

if there no cut off then must be a relay
u got i wiering diagram ?? as td5s are a maze...youll be better off with a wiering diagram then you can see whats what
danny