R

RGT

New Member

• Aug 27, 2007

• #1

The haynes manual shows it in the wiring diagram, but I can't seem to find where it's located, any one know? or have a good guess?
I am having trouble with my rear windows, they seem to work fine every 3rd or 4th time I get in the car, and either both work or both don't, I have never not been able to put them up...
Thanks,

 

mmaddock

New Member

• Aug 27, 2007

• #2

It is behind the glove box!

Common problem - one of the joints on the circuit board cracks. Takes about 30 mins to fix.

check

discoweb.org -- - "Tech" section

If I remember correctly, there is a page that tells you step by step how to fix it.

Matt

 

R

RGT

New Member

• Aug 27, 2007

• #3

Thanks I will break out the iron tomorrow!

 

T

TheMunster

Active Member

• Aug 27, 2007

• #4

Ah cheers nice post mmaddock, I'm having a similar problem to RGT, will post back if it dosent work.

 

R

RGT

New Member

• Aug 28, 2007

• #5

That nailed it, one bad solder joint and it's as good as new. The job was easy enough with your guidance, though I made it harder than it had to be by removing the ecu box from the car instead of just sliding out the circuit board....

 

mmaddock

New Member

• Aug 29, 2007

• #6

RGT said:

though I made it harder than it had to be by removing the ecu box from the car instead of just sliding out the circuit board....

Click to expand...

LOL - tried to do exactly the same thing myself until I realise the board came out! I should have mentioned that one, sorry.

Matt