millar190

Member
Hi everyone anybody any ideas as to why car wont except eka code its a 1995 4.0 v8 with lpg is there a certain way to enter the code
 
have no idea i have a piece of paper with eka code on it but i think it is years old also have checked with land rover and they still have the same no recorded but that dosent mean some **** has not had it changed:confused:
 
It should be the right one! Are you looking at the manual? You should, lock the vehicle, then unlock so many times, then lock so many times, unlock so many times, then lock so many times and finally unlock and that should work! Dont be to fast doing it take your time.
 
have looked the manual it is turn 4 times tolock and then enter code but for what ever reason it will not except the code starting to think it is the wrong code when i enter it it does not change a thing everything else seems to work except the central locking and turn to start it comes up with press remote or enter keycode niether of which make any difference
 
When mine went I tryed to put it in straght away but it would not except the code so I got told to leave it for half a hour then I tryed and it worked first time!
 
i have been ****ing about with it now for best part of a week new lock actuator drivers side have checked all the wiring etc cant find anything wrong thinking of striking a match and seeing how high she can fly:eek:
 
Do you have breakdown if you do they can do it on there computer and that would fix the problem or take it to land rover but it will not be cheap I dont think.
 
Hi everyone anybody any ideas as to why car wont except eka code its a 1995 4.0 v8 with lpg is there a certain way to enter the code
i had to enter my code on a 95 diesel by pressing the unlock button on the remote,then 4 turns left enter code followed by turn to right,worked for mine,make sure there are no dash messages before you start
 
have looked the manual it is turn 4 times tolock and then enter code but for what ever reason it will not except the code starting to think it is the wrong code when i enter it it does not change a thing everything else seems to work except the central locking and turn to start it comes up with press remote or enter keycode niether of which make any difference

on a 95 you dont do the 4 turns to enter programing mode just start by inputing the first number
or at least thats how it is with my 95
 
have tried them all **** all works was just wondering was there anything else wrong that was stopping her from accepting the code
 

Similar threads