Iain C
You can just blank it off with a plate and leave the rest in place.... (I think the plate you can get from ebay is 2mm thick so should fit in between with the same bolts!) The kit I bought had a 6mm plate which is for total removal of the EGR) ...... if you look at the restriction the valve itself causes its bound to stop a bit of air flow but I cant say how much different if any it makes by just blanking it off and not removing it totally.
I just removed mine, and as said best £50 spent on the disco.
Hope this helps
Jack
You can just blank it off with a plate and leave the rest in place.... (I think the plate you can get from ebay is 2mm thick so should fit in between with the same bolts!) The kit I bought had a 6mm plate which is for total removal of the EGR) ...... if you look at the restriction the valve itself causes its bound to stop a bit of air flow but I cant say how much different if any it makes by just blanking it off and not removing it totally.
I just removed mine, and as said best £50 spent on the disco.
Hope this helps
Jack