Hello am back again, i recently got my self an 02 td5 disco as a repair project it come with 2 engines both in bits so i set to work making one good engine out of the parts i had. now its in and i cant get it to run on its own i have fuel to the engine and put a new fuel pump in bit still cant get hear to fire she will run on easystart but as soon as u stop the spray she dies with no fuel i think the problem is with the injectors i did not have any order that there come out of the engine and the book didnt say witch ones go where so i just put them in as there come our the box as i didn't take it apart in the first place but reading more deeply into the book it says that if fitting new injectors i have to program the ECM using a testbook, so do i need to reprogram the ECM as the injectors are going to be in a different order and if so how can i do this with out spending £3000 on a testbook or a lot to go see a dealer
hope some one has done this before many thanks every one for all your help
hope some one has done this before many thanks every one for all your help