Hello Gents, can anyone give me a clue on whats up with this.
She has a very slight leak on the front bag - takes 2 days to drop from standard to access height, but here's the problem.
The system will not tell the pump to run.
when connected to the unlock software there are no faults listed
I can switch the compressor on and off via the lap top, it chucks out loads of air and pressure.
I have tested the pressure switch and its O.K.
I can raise one corner at a time via the software, but then it will self level back to the lowest as it should
basically using the lap top it does what it should - unplug it and the pump will not run, it self levels every time I take the key out but will not run the pump to lift it back up. The lights on the dash when its worked its way down show access constant and a flashing standard, you can leave it running for ages and it still will not lock out or detect a fault.
swapped the ECU under the seat with a known and in use good unit - still no change.
Any clues would be much appreciated Cheers
She has a very slight leak on the front bag - takes 2 days to drop from standard to access height, but here's the problem.
The system will not tell the pump to run.
when connected to the unlock software there are no faults listed
I can switch the compressor on and off via the lap top, it chucks out loads of air and pressure.
I have tested the pressure switch and its O.K.
I can raise one corner at a time via the software, but then it will self level back to the lowest as it should
basically using the lap top it does what it should - unplug it and the pump will not run, it self levels every time I take the key out but will not run the pump to lift it back up. The lights on the dash when its worked its way down show access constant and a flashing standard, you can leave it running for ages and it still will not lock out or detect a fault.
swapped the ECU under the seat with a known and in use good unit - still no change.
Any clues would be much appreciated Cheers
