After getting home on the bump stops ( bottom light solid, second off top light blinking) checked compressor as advised by Wammer How to. Not happy with output! Recon with new seal etc better output. Tank not filling no air coming out of pipe going into tank Agggggh. Have searched loads of threads
Where next guys????? 4 new bags last March HELP PLEASE!
Goldpanner
 
Hey Goldpanner!! I can't really help you on the EAS problem but I saw your tag and just had to give a shout out as I'm a hobby prospector and fossil hound in Colorado.

I haven't found enough gold to amount to anything but fun, but I did find the oldest fossil mammal tracks in the world (at the time anyway, I'm not sure if any older have been found since then). They are in a museum in Fruita, Colorado.
 
If you have good output from compressor and tank is not being filled check diaphragm as in "How to".
 
Hi Wammers. Checked that before recon on compressor, no air coming out!!

Air goes from compressor into tank via NRV1 and through Violet coded pipe from valve block. NRV1 holds air in tank. Did you check exhaust and inlet valves in compressor, it is vital that they seal properly? You should get 175 PSI or so out of compressor outlet, so it should not be possible to seal outlet with finger pressure. If you have good air, tank should fill in five or six minutes with a door open or with doors shut lift car and compressor stop in 10 to 11 minutes.
 

Similar threads