had a flat battery due to my son leaving the interior light on jump started her now ok the eas was playing up aswell so put the lap top on cant get a good idle continuous and the rx signal has all different values coming back not a continous rf any body any ideas could it b the cable or a ecu fault. the suspension is almost correct but not quite right one for datatek i think
yes keith when l fitted the new valve block but the original cable l lost it. so this cable is one l borrowed and lm not convinced its ok and the guy l borrowed it off has never used it but the idle light will not stop green and u get a list of faults like war and piece also this lap top workrd ok when it went into hard fault last time before i fitted the valve block, also u cant adjust the heights as she is sitting slightly to one side when in normal height. the only thing l havent checked is the rear of the obd socket as it was dark when l got round to testing it again
Datatek
Well-Known Member
If you know the laptop/USB adaptor combo works, then quite likely it's the cable. Certainly worth checking the back of the OBD connector though.
Datatek
Well-Known Member
sorry keith but l thought id just give it one last try ironic thing is its ur cable l eventualy got it working with these programes are so temprimental its unreal but ive got it right it bugged me because it didnt sit right so now she sits straight and looks right but thanks for all ur help
Datatek
Well-Known Member
Only joking about the cable, it's a not for profit job anyway, just pleased you got it sorted
