wammers No longer with us, RIP Donater Jun 15, 2019 #21 oakey said: Thanks datatek, I thought those wires were for the switch and the electronic thingy beside the valve block. I think I will be doing that as soon as rain stops Click to expand... The white EAS plug at bottom of A post is the interface height selector switch to ECU.
oakey said: Thanks datatek, I thought those wires were for the switch and the electronic thingy beside the valve block. I think I will be doing that as soon as rain stops Click to expand... The white EAS plug at bottom of A post is the interface height selector switch to ECU.
Dopey Well-Known Member Jun 15, 2019 #22 I stick a bit of copper rod in mine and bent it (careful) over the gas hob, turned out perfect, just do it gently
I stick a bit of copper rod in mine and bent it (careful) over the gas hob, turned out perfect, just do it gently
oakey Well-Known Member Full Member Jun 15, 2019 #23 Ok thank you. Do the height sensors go straight to ECU? Good idea thanks Dopey
T tomcat59alan Well-Known Member Jun 16, 2019 #27 Probably too late now but I made up this former and used a hair dryer to warm the pipe, Attachments 20190616_065142.jpg 197.1 KB · Views: 132
wammers No longer with us, RIP Donater Jun 16, 2019 #28 oakey said: Ok thank you. Do the height sensors go straight to ECU? Good idea thanks Dopey Click to expand... Yes.
oakey said: Ok thank you. Do the height sensors go straight to ECU? Good idea thanks Dopey Click to expand... Yes.