Not as much traction on RangeRovers.net
2005 L322 HSE with 118k miles
Cant seem to find any threads on this. So the full chain of events were:2 months ago, Air Suspension inactive (read codes, cant remember exactly but something to do with overworking the compressor I think, so thinking leak somewhere)
Clear code
Code came back in about a month
Cleared again, and came back in a week or so
Next day or so, truck was dropped down
Started it, Raised itself
Turned car off, Left the door open
Immediately left front drops
Replace strut
Raised itself but had gross leak in left front
Removed fuse
Took wheel off today, and fender skirt in anticipation of filling lines with air and tracing
Got in car, saw it had Air Suspension inactive
Put fuse back in, no lights now on rde height selector switch
Started car, no lights
Fuse in and out with car running, still no lights
Read code even though its not saying "air susp. inactive" anymore, but there was a "ECU Fault". That all it says in the RSW All Comms tool. I saw about 50 other fault codes though for random things, cleared all those even though I had no CEL.
Still NO RIDE HEIGHT lights. I can pull the fuse, and push it back in and the lights will flicker very very quickly, but then out.
Does this sound like the EAS ECU is shot?? Reading several things it could be practically anything from a weak battery to a compressor to an ECU. Aghhh!!!!!!!!!
2005 L322 HSE with 118k miles
Cant seem to find any threads on this. So the full chain of events were:2 months ago, Air Suspension inactive (read codes, cant remember exactly but something to do with overworking the compressor I think, so thinking leak somewhere)
Clear code
Code came back in about a month
Cleared again, and came back in a week or so
Next day or so, truck was dropped down
Started it, Raised itself
Turned car off, Left the door open
Immediately left front drops
Replace strut
Raised itself but had gross leak in left front
Removed fuse
Took wheel off today, and fender skirt in anticipation of filling lines with air and tracing
Got in car, saw it had Air Suspension inactive
Put fuse back in, no lights now on rde height selector switch
Started car, no lights
Fuse in and out with car running, still no lights
Read code even though its not saying "air susp. inactive" anymore, but there was a "ECU Fault". That all it says in the RSW All Comms tool. I saw about 50 other fault codes though for random things, cleared all those even though I had no CEL.
Still NO RIDE HEIGHT lights. I can pull the fuse, and push it back in and the lights will flicker very very quickly, but then out.
Does this sound like the EAS ECU is shot?? Reading several things it could be practically anything from a weak battery to a compressor to an ECU. Aghhh!!!!!!!!!