TITCH SANDERS said:

Hi there, nothing as yet, all four of the height settings on the dash flash together and then all stay on, getting the EAS fault on the too.
Titch

Click to expand...

TITCH SANDERS said:

OK thanks, yes I do have that to as yet put on the computer, not my strong point, but aim to have a session this weekend...but I was just hoping there may be someone localish to me that has this, or something, plus experience of settings etc on the computer side with the P38.
As I said, obviously don't mind paying someone and supply a brew or two, or 3/4 etc!
Titch

Click to expand...

TITCH SANDERS said:

Sorry, probably one of the most common P38 problems.
I've done all the seals on the valve block etc.. but . Is there anyone local to near Stafford (10 miles from me) that can test/diagnose etc via a plug in for diagnostics?
Or sell, lend or just try an EAS kicker on my RR?
Beer tokens available for ANY help or advice on this of course....
Thanks,
Titch Sanders

Click to expand...

Rubberknees said:

Sounds like a hard fault. Needs EAS software to clear. Software free on internet. @Datatek can sort you out with a cable

Click to expand...

Rootsei said:

Just had same issue.

i just had a similar issue, an EAS Hard Fault, no lights on controls and no self level. APPARENTLY only fixable by main dealers OBD. £65 he wanted to change me…so I removed the Neg- terminal and left it for 20 mins…reconnected it and did the left lock and right lock, then used my Kicker and hey presto!…air suspension all singing and dancing!.

Click to expand...