E

eldescans

senior member

• Jul 6, 2015

• #1

I have had to put my car on manual inflation while I sort out my leaking valve block and faulty rear sensor does anyone know if it is possible to disable the eas to stop the flashing lights and annoying continual bleeping

 

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Full Member

• Jul 6, 2015

• #2

There was a way to bridge two pins in the connection to the ECU....I have no idea which pins they were...a search on here will reveal the answer..... I have no idea why but the No. 7 rings a bell...but research is your friend on this occasion.

 

Grrrrrr

Technician, Bodgit & Scarper Ltd

Full Member

• Jul 6, 2015

• #3

eldescans said:

I have had to put my car on manual inflation while I sort out my leaking valve block and faulty rear sensor does anyone know if it is possible to disable the eas to stop the flashing lights and annoying continual bleeping

Click to expand...

Be really careful disabling the EAS. Those manual valves are to get you home only really. It wallows like a boat with the EAS disabled and isn't very safe!

Try putting the height up and down between min and max a few times. Might get lucky and the sensor will work for a bit longer.

 

E

eldescans

senior member

• Jul 7, 2015

• #4

Thanks for your replies, all I really want to do is get rid of the annoying continual bleeping but it looks like I will have to put up with it until I get it sorted

 

Grrrrrr

Technician, Bodgit & Scarper Ltd

Full Member

• Jul 7, 2015

• #5

Try pulling the EAS delay timer under the passenger seat (on a RHD car). Might work but I think you'll get the 35 mph max on the dash still.