pwood999

pwood999

Well-Known Member
Full Member
The other day my suspension failed to pump up. Nanocom showed no faults, and pump running, but when i checked the pump it was off. Not the usual thermal switch or relay fault. Found the plug & socket on the pump wiring loom was severely burnt. Guess the spade connections must have been loose for while.

So temporary fix was to replace with regular 6.3mm spade terminals & my spare compressor.

Eventually found what looks like the correct connector on AliExpress, so I ordered 5 pairs. If they actually are correct there might be a few spare going in case anyone has the same problem.

Pete

upload_2021-1-25_13-52-21.png
 
pwood999 said:
The other day my suspension failed to pump up. Nanocom showed no faults, and pump running, but when i checked the pump it was off. Not the usual thermal switch or relay fault. Found the plug & socket on the pump wiring loom was severely burnt. Guess the spade connections must have been loose for while.

So temporary fix was to replace with regular 6.3mm spade terminals & my spare compressor.

Eventually found what looks like the correct connector on AliExpress, so I ordered 5 pairs. If they actually are correct there might be a few spare going in case anyone has the same problem.

Pete

View attachment 229067
Click to expand...
Hi Pete,

Put me down for a couple of them if you have them to spare. It's happened to me before and I'd love to have a spare or two in my toolbox.

Cheers!
 
You must log in or register to reply here.

Similar threads

J
engine cuts out at high revs, eml on td5
Replies
2
Views
304
Tim4x4
Tim4x4
8v_chris
Air leak detection - EAS woes!
2 3
Replies
52
Views
6K
j38
J
B
Cant clear eas fault
Replies
2
Views
606
Blobthebuilder
B
pwood999
P38A EAS Compressor Repair Time
Replies
5
Views
778
Gord Wedman
G
B
eas fault
Replies
0
Views
325
Bazzer52
B