Northern Irelander
Well-Known Member
You still wheeling dealing dodgy motors Bandit? lol
Yes and No, it will fit but slightly different wiring harness and different MEMS control units. so you'll be faffing about!
Additional cam sensor on later engines (different cam cover!!) plus coil packs (dizzy cap and coil on the early type).
They have different size timing belts and different manual/ auto timing belt tensioners so because of this, it's not just a matter of whipping off the head
Yes and No, it will fit but slightly different wiring harness and different MEMS control units. so you'll be faffing about!
Additional cam sensor on later engines (different cam cover!!) plus coil packs (dizzy cap and coil on the early type).
They have different size timing belts and different manual/ auto timing belt tensioners so because of this, it's not just a matter of whipping off the head
Last edited:
If your mates is a 2002 model then you have all the parts you need to make it work. Just change the inlet camshafts over and the camshaft cover as the early ones dont have the hole for the camshaft sensor the early head should have the bolt holes in it to take the overplug coil set up. I did this to a mates a while ago with no problems.
