F

fireblade7

Active Member

• May 3, 2019

• #1

just rebuilt a 300 tdi 90 on galvy chassis all new bushes discs pads ect
on way to get motd after driving up to 50 on de exelaration theres a bad drumming noise comming from tub
checked all all seems fine changed the propshafts still the same
i have around 30mm free play on rear salisbury diff ??
any ideas folks
thanks
mike

 

jamesmartin

Well-Known Member

• May 3, 2019

• #2

are props phased correctly ,your not in diff lock

 

F

fireblade7

Active Member

• May 3, 2019

• #3

not in diff/lock
what you mean by phazed
as i have never ever put them on a special way before on any rebuilds and never had a problem james

 

jamesmartin

Well-Known Member

• May 3, 2019

• #4

fireblade7 said:

not in diff/lock
what you mean by phazed
as i have never ever put them on a special way before on any rebuilds and never had a problem james

Click to expand...

the relationship between the yokes at either end as below

 

F

fireblade7

Active Member

• May 3, 2019

• #5

i will have a look and see but i have not split them
as for sliding part do they go to transfere or axel ??
regards
mike

 

jamesmartin

Well-Known Member

• May 3, 2019

• #6

rear slide is at t/box end front slide at axle end though that doesnt effect balance

 

F

fireblade7

Active Member

• May 3, 2019

• #7

cheers james will check all now

 

tottot

Well-Known Member

• May 3, 2019

• #8

My bet is on exhaust moving to contact chassis as you slow down.

 

F

fireblade7

Active Member

• May 3, 2019

• #9

alls as it should be

 

F

fireblade7

Active Member

• May 3, 2019

• #10

do you think axel is the problem ?? around 30/40mm play

 

F

fireblade7

Active Member

• May 3, 2019

• #11

tottot said:

My bet is on exhaust moving to contact chassis as you slow down.

Click to expand...

checked that first
was ok