G

gary brion

Active Member

• Jun 15, 2021

• #1

Any recommendations on which way to go I would like one that lasts
I remember fitting one years ago and it only lasted a couple of months,td5 110 hi cap...Cheers

 

Brown

Well-Known Member

Full Member

• Jun 15, 2021

• #2

I put a Britpart one in in 2012. It was hard to fit because some of the components were poorly sized, and it never felt quite right. At the end of 2014 I put a Bearmach one in and it's still there. I wobble it every time I do a service, and can't feel any slack yet.

I've also drilled a hole in the little circular plate and screwed a grease nipple in so it can be lubricated without taking it apart.

 

tottot

Well-Known Member

• Jun 16, 2021

• #3

I did the grease nipple thing on mine some twenty plus years ago, have changed it once since then and plate with nipple went back.

 

G

gary brion

Active Member

• Jun 16, 2021

• #4

Thanks Guys, ordered up now, nice to have some insight

 

payydg

Well-Known Member

• Jun 17, 2021

• #5

gary brion said:

Any recommendations on which way to go I would like one that lasts
I remember fitting one years ago and it only lasted a couple of months,td5 110 hi cap...Cheers

Click to expand...

there’s a guy online that sells the tool to make it easier to take them apart. Not very expensive

 

G

gary brion

Active Member

• Jun 17, 2021

• #6

Thanks il go check it out