Stim8ed

Member
2006 TD4

Anyone have the factory long range driving lights attached? I have a couple of questions…

I have the casings/covers, sealed with silicone, and the brackets attached. The lamps are gone, holes in the bumper, and the connectors are visible. I have a second fog light button next to the cruise and parking sensors… I am assuming this button is for the driving lights?

If I get some new lamps, it should be just to plug them in… anyone that has them know if I am right in my assumptions and additionally, are there known problems with these lamps?
 
Anyone have the factory long range driving lights attached? I have a couple of questions…

I have a new in box set, which I converted to LED, but then never fitted.
I've been meaning to put them on Ebay for ages, but haven't got round to it yet. :oops:
 
I have a new in box set, which I converted to LED, but then never fitted.
I've been meaning to put them on Ebay for ages, but haven't got round to it yet. :oops:
I do like them
But I don’t fancy the cutting ?
But if you are selling them can you let me know please
 
I do like them
But I don’t fancy the cutting ?
I wasn't keen on the cutting either, so didn't do it. The LED conversion means the alloy bumper armature needs a 40mm hole drilling in it too, to accommodate the fan on the back LED. Obviously ordinary bulbs could be used, which is how I'll probably sell them.
But if you are selling them can you let me know please
I am keep on moving them on, but haven't worked out the particulars yet. It's the full kit, with wiring, switches and everything else needed.
 
I took my pair of LR driving lamps off and replaced it with a 22" LED bar. It fitted neatly to the nudge bar and I used the existing wiring - works well with a great light spread but not much increase in range. As mine's a '98 model the switch is down below the mirror adjustor. Can't think of any problems, just make sure what you fit is legal...
 

Similar threads