bigwill

bigwill

Active Member
Hi all, got a disco axel to go on my 1989 90, with the disks etc.. just wanted to know if you can simply swap the drive flanges on the disco one to make em look the same as the original???

cheers
 
i have seen flanges on ebay. never done it tho. asked a mate the same question other day cus my rubber doughnut keeps breaking but he said just to change the diff. £25.00 for one from a breakers, scrap yard. i think you would need to take the diff off to change it anyways.
 
Yeh what gratch said - drive flange. Can you swap the flat disco one to an outward pointing original/HD one?
 
oh............and to answer original question, pull out both sets of half shafts (and drive members) and measure lengths and splines and use common sense to see if they're interchangeable
 
Cool, just using common sense to see if anyone had already done it, to save me bothering to check it, if they don't interchange then I don't want to waste time taking the whole lot apart when, with o e simple question on here I can have an answer! - cheers

question still stands...
 
You must log in or register to reply here.

Similar threads

mudmut
Brake pad identification
Replies
2
Views
380
mudmut
mudmut
H
2.5TD where to mount center exhaust bracket
Replies
10
Views
636
dag019
dag019
H
Indicators not behaving - any ideas?
Replies
6
Views
531
henrythelandy01
H
stumpyj
Fuel Line worn through
Replies
2
Views
315
stumpyj
stumpyj
A
The Three Amigos - ABS problem error cide after changing right outer drive axel CV joint !
Replies
12
Views
675
Arnodafe72
A