Discovery82
New Member
I have patched up a leaking pipe on the ace system with 10mm hydraulic pipe and 10L compression fittings but I have obviously disturbed the other pipes as one has began to leak badly just before it enters the front of the ACE valve block.
Would it be possible to drill and tap the ports on the block to screw in some 10L adapters so I can replace the bad/corroded pipes with hydraulic pipe?
Thanks
Kyle
Would it be possible to drill and tap the ports on the block to screw in some 10L adapters so I can replace the bad/corroded pipes with hydraulic pipe?
Thanks
Kyle