R

randommike

New Member

• Jun 17, 2011

• #1

Hi i have a 2004 hse td4 with the built in single din - sat nav which i do not get on which i have just purchased a double din KENWOOD DNX5220BT (ipod, bluetooth, satnav, dvd etc) to replace it with, does anyone know what i will need to purchase to fit it in

Any Help will be great, many thanks

Mike

 

markyzs180

Active Member

• Jun 17, 2011

• #2

all in this thread mate.... iso adapters, facia plates, how to get it out and the all important wiring colours for the steering controls

http://www.landyzone.co.uk/lz/f9/fitting-double-dinn-gps-dvd-into-dash-133257.html

 

R

randommike

New Member

• Jun 21, 2011

• #3

read through over 70 pages to find to replace the becker with the hk system no extra loom id req arghhhh - purchased the facia adaptor - now need to order the steering wheel adaptor does any one know which adaptor will connect the kenwood headunit to the steering whell remote) - 2004 td4 hse (becker system version )

 

R

randommike

New Member

• Jun 21, 2011

• #4

is this the one PC99-X91 ?

 

2.0_hippo

Well-Known Member

• Jun 21, 2011

• #5

randommike said:

is this the one PC99-X91 ?

Click to expand...

That's the one mate
Just then have to buy a patch lead to connect from the pc99-x91 to your head unit depending on what make your fitting

 

R

randommike

New Member

• Jul 10, 2011

• #6

Hi i brought the lead as mentioned above but it will not fit at all as i had the standard iso connectors already (i had beck sat nav before) so this lead will not fit at all completly wrong connector

Do i simply disregard the connecter use the autoleads box and patch lead by wiring it directly and use cable spitters to connect it up?

 

R

randommike

New Member

• Jul 11, 2011

• #7

on my orginal becker sat nav with hk audio - i have a single pink wire which controled the becker head unit for the volume and track change.

on the PC99-X91 if i cut of the incorrect loomconnecter and wire all of the main wires directly in the orginal loom using splicers

i will have 2 cables left a brown and black cable and a black and white cable which will operate the controls? where do i wire these into and will this still work?