F76E881A-7124-46F4-8A95-D26C8F18F0DA.jpeg
F54D5EE2-0D5C-475F-BD82-C920332FA1FD.jpeg
D7A9394F-AA13-481C-9870-359955A7861B.jpeg
Pics
 
Next job cut out rust, cure area and weld in some fresh metal, props removed ready for arrival of new ujs
 
Need to get underneath and have a good look over

Main issue is when I dissarm the alarm the hazards flash - good but when I arm it I get no hazard flash recognition so not sure what’s going on there
Need to get underneath and have a good look over

Main issue is when I dissarm the alarm the hazards flash - good but when I arm it I get no hazard flash recognition so not sure what’s going on there

Low Battery in the Key Fob;)
 
Ha ha yes the wheels are large to say the leest it does have a sway bar for the spare but still fair bit of pressure for it

Sorted alarm issue, bonnet switch needed adjusting, and one fob had a low battery now have two working fobs so all gravey
 
Ha ha yes the wheels are large to say the leest it does have a sway bar for the spare but still fair bit of pressure for it

Sorted alarm issue, bonnet switch needed adjusting, and one fob had a low battery now have two working fobs so all gravey
You’re welcome......
 
Sorted before I read your post but cheers :)

Cleaned up the nsr rear lip which has some surface rust with my small bit of spare time today , now ready for primer and paint also cleaned up and treated the battery tray ready for paint which is in better condition than I had hoped
 

Similar threads