Rkb101111 rear springs purple/ brown
Nrc8045 front springs Yellow/yellow

is the combination I went for along with standard shock absorbers all round
 
4F8E39BD-194F-4218-BB13-EDFE84256AF1.jpeg


C0A588D8-CD00-4AA1-A330-69FA822B57DF.jpeg


couple more pics with new suspension setup, driven her a bit more now and really happy - feels planted round corners and doesn’t feel like your teeth are going to fall out over bumps/holes
 
Cheers mate :)

just treated her to a vdo maf ( think it’s mucking about) and new water pump as when your driving the heaters pump out hot air but when you stop and idle it blows cold- bled the system twice and no air locks so suspect the water pumps knackered
 
Yea good cheers mate other than getting a few call out jobs from work it’s been pretty chilled, yourself?
 
Most folk on here can only take your work for that as their teeth will be in a glass ont bedside table :D

Ride on mine is harder than a fcucking track car. After lots of cleaning I uncovered OME shocks but the logo alone shows they are very old. I’m going to do the same and just bang standard setup on!
 
Ride on mine is harder than a fcucking track car. After lots of cleaning I uncovered OME shocks but the logo alone shows they are very old. I’m going to do the same and just bang standard setup on!

Very true and yes I mean I only use it for up the shoot and a light bit of laneing but mainly for taking the dogs out so I have no need for a lift kit it’s amazing where a land can go on standard suspension driven properly
 
Also on the down side found oil in the injector loom again! Only replaced It about a year ago how long are you lot getting out of a loom before oil returns at plug end?

maybe I’ll get a genuine one this time but can’t see it making much difference to the aftermarket one I previously fitted
 
I left it dangling when I wasn’t using it for a couple days and kept spraying contact cleaner down it at the connector end next to the rocker cover. It does take ages to work it’s way out (weeks!), so I was unplugging it every now and then to give a blast with contact cleaner ecu end. Watch the rubber gasket inside the plug - if you get it coated in cleaner it will swell up and be a bitch to fit again.
 
Very true and yes I mean I only use it for up the shoot and a light bit of laneing but mainly for taking the dogs out so I have no need for a lift kit it’s amazing where a land can go on standard suspension driven properly
Yeah mines dogs, fishing and daily. I don’t need lift or anything, just the 4wd for mud and slippy fields/banks. I think most lift for looks half the time!
 
Sorry if you said - did you go with boge? I’ve gone boge rears then next payday getting the spring set and turrets and shocks for front. She’s in for a big bill thing month so couldn’t buy all in one! I seem to always be one step behind your thread with my motor lol.
 
Sorry if you said - did you go with boge? I’ve gone boge rears then next payday getting the spring set and turrets and shocks for front. She’s in for a big bill thing month so couldn’t buy all in one! I seem to always be one step behind your thread with my motor lol.


Make sure u got plenty wax oil I brushed a load all inside the upper spring mounts as they can’t be properly accessed when springs in place , believe it or not I went for blue packet shocks ( A mate has had a full set on he’s for years now and no leeks and they give a nice ride) And to be fair I’m really happy with how mine drives and the price
 
It’s not all tat - just has a bad name on a lot of stuff lol. Cheers, I still have left over lanoguard and dynax which I’ll slap all over front end when I get onto it.
 

Similar threads