dougdotcom
Active Member
Sounds like the rods need setting up and need adjusting to give a shorter pull from the handle. Do the rods have slots in them to adjust the clips?
Thanks, I'll pop the doors cards off and take a look, didn't know they where adjustable!
dogsbody
Very senior member
Having done everything I could inside my doors they still need a bit of effort to open. I haven't investigated yet but I'm wondering if it's a bit of wear in the hinges and the door is 'leaning' slightly on the lock. It's on my list as one of those little things that can wait for warmer weather and lighter evenings.
PPP38vouge
Active Member
Hi Rachel, could you please tell me where you got those door handle kits from, need to do mine as they also do not return properly when released . Is it a hard job too do?
Thanks Paul.
Thanks Paul.
southby
Member
just ordered mine from island4x4. part nos stc3063 and stc3064 for left and right
southby
Member
Believe it or not cheaper from Rimmers.
too late for me i'm afraid
(incidentally lrspareparts are 4p cheaper than rimmers
)
too late for me i'm afraid
(incidentally lrspareparts are 4p cheaper than rimmers
Just going on the postage and VAT. Rimmers £9.00 all up. Island £11.00 all up. Rimmers £2.75 each incl VAT plus post. Island £3.00 each incl VAT plus post. Minimum post is £5.00 at Island. Post from Rimmers £3.50 don't know what LR spareparts post is.
Sorry to miss your post. Island 4x4 above. Codes as stated. Rach
