[JP]
New Member
Evening gents...
was sat here bored and thought posting about this as someone might have an idea...
the door bottoms on my 90 are pretty rusted, so the doors dont close flush with the rubber seals, and the rubber seals are not in their best state either..
meaning..
when im flying through mud, the muddy water comes flying in, close to the door card..
I thought about replacing the rubber seals for new ones, but im sure this alone wont cure the problem as the gap is bigger than normal...
any ideas on what to use to help seal the door against the floor side (sill)?
cheers!
JP
was sat here bored and thought posting about this as someone might have an idea...
the door bottoms on my 90 are pretty rusted, so the doors dont close flush with the rubber seals, and the rubber seals are not in their best state either..
meaning..
when im flying through mud, the muddy water comes flying in, close to the door card..
I thought about replacing the rubber seals for new ones, but im sure this alone wont cure the problem as the gap is bigger than normal...
any ideas on what to use to help seal the door against the floor side (sill)?
cheers!
JP