RangeRoller dt
Well-Sprung Member
I see no pick?
RangeRoller dt
Well-Sprung Member
Leave it there for someone with younger knees 
Oh dear, we've gone and put you off. Sorry.
This site definitely IS the #1 spot for help on all the older models of LR products.
Really Glad to see that you have resolved your problem.
Did lowering the glass (as I said) allow you to get a pick in there to pull the latch?
Those clips can get brittle with age, but £13-ish for a new one is a bit steep isn't it?
tomcat59alan
Well-Known Member
Thats in the garage,the photo was in my gallery,from an old post where someone needed a bit of gentle persuasion .
oldtel48
Member
Thanks for your help I went out and tried it again and the blessed door opened so was able to take the door card of.Oh dear, we've gone and put you off. Sorry.
This site definitely IS the #1 spot for help on all the older models of LR products.
Really Glad to see that you have resolved your problem.
Did lowering the glass (as I said) allow you to get a pick in there to pull the latch?
Those clips can get brittle with age, but £13-ish for a new one is a bit steep isn't it?
From there it got a bit complicated, got in touch with my supplier and was told that I needed to buy the inner door handle
£80. Went on line and found the land rover part No FVF10002L[ sorry to upset any but I payed £5 for them in sealed LAND ROVER
PACKS] will fit on Monday will let you know how i get on
tomcat59alan
Well-Known Member
From memory I don't think those clips fit on the interior handle where the cable attaches,they are more for the rods from the latch.
Magic.Sorry did i miss how the door get opened in the end,,,,,,,,,
Last edited:
dubbleRR
Well-Known Member
Witchcraft,...Use the force Luke ,,use some force
Yes, see post 2 above this one. The door opened OK of its own accord and he took the door card off to find the broken clip.Sorry did i miss how the door get opened in the end,,,,,,,,,
oldtel48
Member
Sorry did i miss how the door get opened in the end,,,,,,,,,
I think the green ones are for the rods the one I have purchased is white keep fingers crossed thank you for pointing it out
will let you know how I get on
Take a couple of pictures of your beloved classic. We like pictures, just don't ask @tomcat59alan, @holidaychicken, @kurtjohnson10 or @Broke Again for any of theirs!!!
kurtjohnson10
Well-Known Member
Take a couple of pictures of your beloved classic. We like pictures, just don't ask @tomcat59alan, @holidaychicken, @kurtjohnson10 or @Broke Again for any of theirs!!!
Last edited:
oldtel48
Member
I would if I could but I don t know how sorryTake a couple of pictures of your beloved classic. We like pictures, just don't ask @tomcat59alan, @holidaychicken, @kurtjohnson10 or @Broke Again for any of theirs!!!
I have spent the last 5 years stripping it down to the bare chassis welding the chassis in 2 or 3 holes it was not bad a condition other
than having to remanufact a new rear cross member
And pray tell why wouldn't he ask them. There's nothing like a good educationTake a couple of pictures of your beloved classic. We like pictures, just don't ask @tomcat59alan, @holidaychicken, @kurtjohnson10 or @Broke Again for any of theirs!!!
I'm in! Let me find my suitcase
brianp38dse
Well-Known Member
When you are writing your replys over bottom right you will see a box (Upload a file) click on that ,then you will get a bit that says browse, click on that find you pic from your gallery and click on that it should then load, give it a go whats the worst that can happen not a lot.
