james6546

Well-Known Member
Hey, long time no post....

Wondering if anyone knows where I can find these white door card clips
20170715_165936.jpg
They are from the door cards on a defender, then clip into these
20170715_165941.jpg

So far I've bought three packs of them from ebay and they are all wrong. Turning into an expensive mistake!

Thanks
 
I thought the white parts were part of the door panel and not available separately.

The black clips should be available most places.


Cheers
 
the white bits are part of the door card :( the white bits that go in the door are snapsacks. The black bits are part number MXC1800, the snapsacks are MWC3136
 
if you need to fit black clips too the white clips but the groove part has broken as they commonly do you can drill a small hole into white clip and screw a small / short counter sunk screw in and then black clips will fit like a good un ,,,,,,,,do hundreds of clips this way :D:cool:
 
if you need to fit black clips too the white clips but the groove part has broken as they commonly do you can drill a small hole into white clip and screw a small / short counter sunk screw in and then black clips will fit like a good un ,,,,,,,,do hundreds of clips this way :D:cool:
Totally second that. I used these LINKY pretty sure i used the No6, but I can check if you want. The flanged head gives a wide, flat surface for the clip to slide on to. You can adjust how far on you tighten the screw, using a black clip to test. So you know how tight the door card is going to grip when you put it on.
 
Thanks, I might have to do that then.

I brought the door cards from sp and they haven't got the plastic bits...
 
I've just looked on their site and the door description says this.
ABS Plastic Door Card - LH Light Grey With Manual Windows - Push Button Handle

Superbly formed ABS plastic door cards. Uses standard Land Rover 'hidden' fixings rather than other cards on the market that use self-tappers with heads exposed to the eye.

I would take 'standard Land Rover hidden fixings' to be the white clip heads.
Before you drill holes in them I would give them a call. I've spoken to them before and the seemed very reasonable to deal with.
 

Similar threads