Mel botterfield · Feb 26, 2017

Hi, I have just bought an 06 freelander and would like to tidy up the door Paul and dash trims where the paint has been worn away. I have read the various bits will prise off and would like some advice on how to do this.
Thanks,
Mel

Nodge68 · Feb 26, 2017

If you are talking about the silver trims. Then the door pulls are just clipped on. If you squeeze them, you can feel them creak, so they aren't tight. Just gently lever off the silver section. I can shift mine with my finger nails.
The centre bits each side of the radio aren't removable as they are simply painted sections of the console.
The dash trims come away after the screws have been removed. There's screws at the bottom and the top iirc.

Mel botterfield · Feb 26, 2017

Nodge68 said:
If you are talking about the silver trims. Then the door pulls are just clipped on. If you squeeze them, you can feel them creak, so they aren't tight. Just gently lever off the silver section. I can shift mine with my finger nails.
The centre bits each side of the radio aren't removable as they are simply painted sections of the console.
The dash trims come away after the screws have been removed. There's screws at the bottom and the top iirc.

Thanks for the prompt reply. If it stops raining ,I'll have a go.

Alibro · Mar 4, 2017

Buy a set of these to make life much easier.
http://www.ebay.co.uk/itm/UK-Car-Au...683036?hash=item33bba805dc:g:cqAAAOSwj2dXjghq

Mel botterfield

Member

Nodge68

Well-Known Member

Mel botterfield

Member

Alibro

Well-Known Member

Similar threads