Huddy84 said:

I think its just a case of loosening the hinge bolts and seeing what you can get. Very fiddly.

Click to expand...

zeaphod said:

Move the roof rack back if you can, it can be a bit of a ball ache getting the doors to line up.

Click to expand...

pete1987RRC said:

Can you grind some meat off the door rack rackets.?

It is worth moving the doors down a tad and not a difficult Jon, LR never lined them up that well!

Click to expand...

14platoon said:

What hinges do you move, the ones on the frame/bulkhead or the ones on the door?

Click to expand...

pete1987RRC said:

Your choice will be limited by the early onset of local fixing corrosion, ie rust.

Which ever ones you can undone, an old style impact hammer will be your friend, you only need a couple of mm, wobble space round the bolt will do it.

Do firstly check that the door lock plates can be undone as they too will need a tweak.

It’s easy to be fair

Click to expand...

zeaphod said:

If you're determined to move the doors, move at the bulkhead side of the hinge. You'll need a PZ4 screwdriver head, works well in a 3/8 socket drive with the appropriate adapter. Loads of releasing oil the day beforehand will help.

Click to expand...