Turboman
Mab An Gov
Breakers? I have had good results before.
Breakers? I have had good results before.
IamRobbie
Well-Known Member
Didn't think there were any land rover breakers around lol just people who strip um
Turboman
Mab An Gov
Plenty around. A friend does it locally.
I have also bought parts from breakers upcountry, just googled em up, dingocroft are good sometimes, got a late model door slightly bent,(twisted, not stolen), for £100.
I bought a mint fan and cowl for me 90 when I junked the electric fans, only about 50 quid delivered down here! Breakers in the Midlands, just got em off google search.
Blackburn
Well-Known Member
This just upon ebay oil bath filter
http://www.ebay.co.uk/itm/series-la...965412?hash=item3ac9284fa4:g:4RcAAOSwaB5XnfLQ
http://www.ebay.co.uk/itm/series-la...965412?hash=item3ac9284fa4:g:4RcAAOSwaB5XnfLQ
IamRobbie
Well-Known Member
Will look for one. Will an oil one from a series be waterproof as I like the water when I off road lol
Turboman
Mab An Gov
No airbox is waterproof, the air has to get in, the water can too.
Raise the intake up using a snorkel or suitable piece of tubing.
Although having thought about that, not sure if you can easily fit snorkel to a series airbox, 2.5 td/na you can.
IamRobbie
Well-Known Member
LOL I didn't mean that mate. I have a snorkel with a mushroom top going straight into the turbo air intake via no filter or box. The comfort that the only place water. Could leak in is if I sink the snorkel under the water or the clamp wasn't tight at the turbo. Adding an air box worries me with the fact water could get past the lid, or two more connections (in and out) plus they come with one of those poxy drains which could potentially suck water in when submerged.
Anyway sorry for the thread hi Jack lol
Turboman
Mab An Gov
IamRobbie
Well-Known Member
Canna win lol! I'll keep an eye out for a 19j air filter box and stick It where it actually belonged in the first place. I'll also use the crank breather hole to actually put the crank breather on instead of venting to airRunning without an air filter would worry me anorl!
Turboman
Mab An Gov
IamRobbie
Well-Known Member
Current engine is blowing like mad but got a bottom end I'm rebuilding at the min so should be safe afterwards hahaGood plan! Not sure about the crank breather, though, direct to atmosphere is safe!
Turboman
Mab An Gov
Also, if you do fit a td box, check the condition of the rubber tit on the bottom, and replace if necessary. Water gets in them if they are old and perished!
IamRobbie
Well-Known Member
Just got to find one. Not paying 50 quid like folks on eBay want lolAlso, if you do fit a td box, check the condition of the rubber tit on the bottom, and replace if necessary. Water gets in them if they are old and perished!
You used to be able to get a kit to fit a snorkel to an oil bath, but I doubt theres any left, seeing a series with a snorkel is a pretty rare thing.
IamRobbie
Well-Known Member
I just need a small easy to fit waterproof filter haha.
Something like this? loads on ebay
http://www.ebay.co.uk/itm/Carbon-Fi...230974?hash=item2cadab133e:g:LS8AAOSwhkRWb4yC
http://www.ebay.co.uk/itm/Carbon-Fi...230974?hash=item2cadab133e:g:LS8AAOSwhkRWb4yC
IamRobbie
Well-Known Member
Yer something like that haha less the effect of it being a turbine in it lol
