mickdj

New Member

• May 3, 2010

• #1

mine was rotten past the putting a new pannle in so i cut it all out and used angle to make a new frame

 

Attachments

• 
  new1.jpg

  28.2 KB · Views: 224
• 
  new10.jpg

  28.7 KB · Views: 203
• 
  new9.jpg

  23.7 KB · Views: 209
• 
  new8.jpg

  30.5 KB · Views: 212
• 
  new7.jpg

  24.2 KB · Views: 199
• 
  new6.jpg

  25.7 KB · Views: 199
• 
  new5.jpg

  27.1 KB · Views: 208
• 
  new4.jpg

  21 KB · Views: 217
• 
  new3.jpg

  23 KB · Views: 204
• 
  new2.jpg

  29.1 KB · Views: 223

mickdj

New Member

• May 3, 2010

• #2

then use flate plate over the lot the only problem iv found is that its abit hight so i have to push down on the backs of my rear seats to get them to click in and the last pic after flooding my car i decided to pull all the carpits out and shoults it all

 

Attachments

• 
  new11.jpg

  24.9 KB · Views: 231
• 
  new12.jpg

  19.4 KB · Views: 215

Garth of the west

New Member

• May 3, 2010

• #3

Looks good to me, I like the cheaper options.

 

mickdj

New Member

• May 3, 2010

• #4

think i only spent £20 on some angle and shoults id got the rest of the stuff

 

666 george

Well-Known Member

• May 4, 2010

• #5

The only problem I'd have is the dog will be skidding around in the back. As long as it passes an MOT it don't matter what it's made of.

 

D

David Pye

Active Member

• May 4, 2010

• #6

Better to have the dog skidding around than falling through the bloody great hole in the floor ;-)

 

mickdj

New Member

• May 4, 2010

• #7

i was gob smacked at how bad it was realy the seat belts what was solid and the center cross members were kinda ok, dog should be ok made a new boot carpit.

 

[JP]

New Member

• May 4, 2010

• #8

nice job there....

did you remember to clean the sedimenter while you had it like that?